Most people should have their deck cleaned about once a year. Over time, dirt, grime, mold, mildew, and debris build up on the deck surface, especially on a wooden deck or composite deck. Regular deck cleaning keeps the entire deck surface safe to walk on, helps prevent discoloration, and protects the deck boards from damage caused by moisture and wet wood.

Yes, when done the right way. We use controlled pressure washing with a fan tip nozzle on the power washer so the pressure does not scratch or damage the wood, composite deck, or boards. A strong blast can harm the top surface, so we adjust the spray to gently wash, rinse, and clean without cutting into the surface.

We use professional deck cleaning solutions along with safe cleaning products made to remove tough dirt, grime, mold, and stubborn deck stains. Depending on the materials, we may use oxygen bleach, deck brightener, or a powerful natural cleaner like white vinegar, baking soda, or mild soap mixed in a bucket with warm water or warm soapy water. We avoid harsh chlorine bleach unless it’s truly needed.

Yes. Stubborn stains, including grease, wood stain, rust, and foot traffic marks, can often be removed with the right solution and the best way to scrub. We use a stiff bristle brush or soft bristle brush to gently scrub the deck boards without harming the surface. For some spots, a spray bottle with vinegar or oxygen bleach can help lift stain and discoloration.

No. We always protect plants, pets, and children by using safe deck cleaning solutions and by doing a pre rinse with a garden hose before we spray or wash. Everything gets a full rinse with the hose after cleaning so there is no leftover bleach, soap, or residue.

Yes. We clean every type of wood deck and composite deck. Each material needs different pressure, cleaning products, and instructions. A wooden deck may need a deck brightener and a softer nozzle, while a composite deck often just needs a good wash with warm, soapy water and a careful scrub.

Most decks take a few hours from start to finish. We begin by sweeping and using a broom or leaf blower to clear debris. Then we pre-rinse, spray our solution, scrub, and rinse the entire deck surface. Dry time depends on sun and shade, but the deck is usually ready to sit on the same day.

Yes, that is good advice. Once the deck surface is fully clean and dry, adding a deck sealer or paints and stain helps protect the wood from water, sun, and wear. If your wood deck has rough boards or splinters, a little sanding may be needed before sealing. We can point you to trusted pros for sealing after we clean.